Description

**This set comes with 2 units Transceivers

The brand new RF-603 is a wireless flash trigger that can be used to trigger flashguns as well as studio strobe flash and also can be used as a remote shutter. It is transceiver type, which means you can use both as a transmitter or receiver. RF-603 is powered by AAA batteries which is widely available in the market. The 2.4GHz wireless frequency is suitable in most countries and guarantees good response, working distance and stability. It has a long working distance of up to 100m. It also can sync up to 1/320s, depending on the model of camera body or flashgun it may reach to 1/250 or less. A set comes with 2 units transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver.

Supports TTL pass-through for flashgun placed on top of the transceiver (that is placed on the camera hotshoe).

Features

1. Works as a wireless shutter release control

• Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported
• 1 shutter release cable is included in the package
   

 2. Transceiver based system - works as a wireless flash trigger and receiver

• Each RF-603 is designed to work as transmitter and as receiver. The unit automatically detects the mode it should work in. You have the full flexibility out of your gear.    
• As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver.
• Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
• Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
• As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. In the latter case you are free to mount an additional flash top-camera.
• One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers.
   

3. Wirelessly trigger studio strobe lights

• Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes.Optional cables of 3.5mm (1/8") or 6,35mm (1/4") can be purchased separately.

Specification (each item)

Camera compatibility list:

• N3 for Nikon D90, D7000, D5100, D5000, D3100, D3000 (for D3000, remote shutter cannot be used as D3000 doesn't support wired remote)

Compatible flashguns

•     Nearly all flashes with a standard hot shoe and being released by the middle contact are compatible
•     Please note that the RF-603 only supports the manual flash mode, not TTL, but it works with TTL flashes
•     Supports the "sleep mode" or "wake up" mode which some flashes are equipped with
•     Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX
•     Nikon SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24
•     Not compatible with Nikon SB-600
•     Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
•     Olympus FL-50, FL36
•     Fuji Film：S3Pro / S5pro
•     Metz
•     Nissin, not complatible with Nissin Di622 Mark 1 Nikon old firmware
•     Sigma EF-500 DG Super, EF-500 DG ST, EF-430
•     Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D
•     Vivitar 285HV
•     Yongnuo YN460, YN462, YN465, YN467, YN468, YN560
•     Not compatible to Sony/Minolta flashes
   

Package includes:

•     2 units RF-603 Transceivers
•     1 unit C1 Shutter release cable
•     1 user manual

Write a review