Konova Camera Video Slider Dolly K2 60cm (31.5 Inch)

Konova Camera Video Slider Dolly K2 60cm (31.5 Inch)

Quick Overview

• This one is made in Korea by Konova at hight quality
• The stable and smooth takes are the basic elements of the film art. Photos took accurately facilitate perception of content correctly and improve values of ultimate version of the movie.
• Main body made in Samsung factory. 
• It allows you taking both video and photos on it.
• The slider has 3 pair of 1/4" & 3/8" screw in the base.
• It's a prefect instrument for both personal & pro film art.
• The slider equipped with 2 oil sil for removing dust and water.
• Recommended ballheads : 0529H,0570H,MANFROTTO 701 / 501 / 503 head
• The slider system is compatible with cameras
• (for example,Canon 7D, Canon 5D Mamk 2 , 3)

If you mount your slider onto a tripod and flip it vertically using a ball head or a fluid head, Or you can also usingwithout ball head. you can get vertical shots. Reveal something from the ground up or top to bottom. This is oneof important ways of using the slider because it can be dramatic shot depending on what you’re shooting.Inaddition, you can set up slider like a vertical line through 1/4 , 3/8 screw holes at both sides of sliders.If you using quick shoe makes you can save your time.

You can set up tripod or head at the bottom of slider rail.Combine the Konova Slider with a modular ball head or3/8"-5/8" adapter (not included) and those allow you to get push/pull, side slides, and even vertical shots. Any360 degree angle that your tripod will allow.

The height of two stands could be different and you can set up them just like a diagonal line. It's possible to bemoved even if the position is diagonal.

You don’t always have to slide right to left. Push your camera into the subject, pull away from the subject andpass object on the way. Get creative. Creating different perspectivesmakes some cinematography. The viewerlikes to see what they normally can’t from eye view.There are 1/4, 3/8 inch screw holes that can be set up with other accessories at bottom of slider. You can setup tripod at left side of slider like a horizontal line and move main block to right side.

For a secure set up on different surfaces, the legs are fitted with rubber feet. To allow  uneven ground andstraighten the camera bracket with stable, each legs can be adjusted in height and degrees .

Unlike other similar products, you can also adjust every single slider legs in 16 angles. It allows sliders to beset up in anywhere. By the way , the legs are very light and very easy to equip.

The legs are very light and easy to set up. Also through two guide pins, the legs can be stably attach very well.

There are two ways to adjust friction in our slider. First option to adjust friction is loosening and tightening thered knob. The tension can be adjusted instantly. We designed that the spring is putted in the end of knob. Itavoids the knob touching rail too excessively.

Second option to adjust friction is use hex wrench that we provided. If you want to adjust tension more precisely you should use wrench to do that. More detail instruction can be found on our web site (www.konova.co.kr). Also you can check  “Set up guide” that packaged with slider together.

We put heat treatment concentrically on the abrasive part and precisely grind it to make its surface roughnessto 1.5mm. This process iscritical technology (it called “Super-finishing”, There`s four steps for precisely grinding)on slider. When we put heat treatment with Super-Finishing the shaft appearance looks like mirror. Not onlysplendid look but also decrease surface roughness. (The surface roughness figure : lower is better.)

In addition, double row angular contact bearings in K2 slider makes complete rolling motion. It makes quietoperation with smooth. Those whole process makes sliders are much better quality.

We provide ruler sticker that packed with slider together. The sticker makes shoot like it hasmeasured the distance down to the centimeter. If you want to make a precise shoot, rulersticker is the one of good choices. In case of slider 120cm, we put 2 stickers in package. Just cut appropriate length to adjustsize you need. In the future, we will provide ruler sticker for inch and slider 120cm .

The shaft straightly inserted in the rail is made of high carbon bearing steel and enhanced surfacehardness to HrC60 by high frequency treatment. (The hardness figure is higher is better.)We`ve enhanced surface hardness in every material in ourslider. (*Hardness of general stainless is Hrc40)

The slider can either be oriented close to the ground attached to the included legs, or in various combinations ontripods. For mounting on tripods you will find connecting threads at the bottom of the slider (right, center and left)For vertical movements, the slider can be mounted on a tripod.

To attach a tripod, you will find connecting threads at the head and the foot of the slider. All connection pointoffer one with a 1/4" and one with a 3/8" thread.

We provide free bag to carry your slider safely. It makes your equipment is easy to carry and going to anywhere.Can put it on one sliderand feet with pouches.

Write a review