Rode RodeLink Wireless Filmmaker Kit (RL-FILM)

The RodeLink Filmmaker Kit from Rode is a wireless system for film and video production that features a transmitter, receiver, and an included lavalier microphone. The system utilizes a Series II 2.4 GHz 128-bit encrypted digital transmission signal that constantly monitors and hops between frequencies to select the strongest signal. The kit offers a high signal-to-noise ratio and provides a high-resolution 24-bit 44.1 kHz digital transmission of lossless audio at a range of up to 328 ft. Up to 8 systems can be used together simultaneously.

The beltpack transmitter features a simple 3-stage gain adjustment and a mute lock function to prevent accidental muting. A locking 3.5mm input audio connector ensures body worn microphones remain secure. The camera mount receiver features a removable shoe mount enabling it to be used on camera or as a belt pack receiver. A mute override function gives complete control to the operator, while mute status, input level, and battery status for both the transmitter and receiver are displayed on the front of the unit. The receiver also utilizes the same locking 3.5mm connector as the transmitter to provide solid security.

Both the beltpack transmitter and camera mount receiver can be powered by any USB power source using a standard micro-USB cable. The system offers eight discrete channels that can easily be set up in seconds with over 8000 different channel combinations available. Channel selection and pairing is achieved with a one-press operation and automatic scanning, which significantly reduces setup times when compared to traditional UHF setups.

• Includes Transmitter, Receiver, Lav Mic
• Series II 2.4 GHz Digital Transmission
• 128-Bit Encrypted Signal
• 24-Bit/44.1 kHz Lossless Transmission
• Up to 328 ft Range
• One Touch Pairing
• OLED Digital Display
• 3-Level Gain Control
• USB and AA Battery Powered
• Use up to 8 Systems Simultaneously
• Designed and made in Australia
   

  General Specifications
  Transmission Type	2.4 GHz fixed frequency agile system
  Dynamic Range	112 dB
  Range	328 ft (100 m)
  Frequency Range	35 Hz to 22 kHz
  Maximum Output Level	1 Vrms (2.8 V, peak to peak)
  Maximum Input Sound Level	1 Vrms (2.8 V, peak to peak)
  Latency	Maximum Latency: 4 ms

  Receiver
  Power Source	2 x AA battery and micro-USB
  Antenna	Internal
  Output Connection	3.5 mm TRS jack socket (dual mono with thread lock)
  Output Impedance	300 ohms

  Transmitter
  Power Source	2 x AA battery and micro-USB
  Antenna	Internal
  Input Connection Type	3.5 mm TRS jack socket (with thread lock)
  Input Impedance	10 kOhms

  Lavalier Microphone Specs
  Acoustic Principle	Pressure gradient
  Active Electronics	JFET impedance converter
  Capsule	0.1" / 2.5 mm
  Polar Pattern	Omnidirectional
  Frequency Response	60 Hz to 18 kHz
  Output Impedance	3 kOhms
  Max SPL Level	110 dB SPL (@ 1 kHz, 1% THD into 1 ohm load)
  Maximum Output Level	189 dBu (@ 1 kHz, 1% THD into 1 kOhm load)
  Sensitivity	-33.5 dB, 1 V/Pascal (21.00 mV @ 94 dB SPL) ±2 dB @ 1 kHz
  Equivalent Noise Level	25 dB-A (A-weighted)

  Physical Dimensions
  Dimensions (H x W x D)	Receiver: 4.4 x 2.6 x 2.0" / 11.1 x 6.5 x 5.2 cm Transmitter: 4.4 x 2.6 x 1.6" / 11.1 x 6.5 x 4.0 cm Lavalier: 47.2 x 0.2 x 0.2" / 120.0 x 0.5 x 0.5 cm
  Weight	Receiver: 6.7 oz / 190.0 g Transmitter: 6.7 oz / 190.0 g Lavalier: 0.04 oz / 1.00 g

Write a review